Tube Speaker ONE “Cyclop” – a more or less moderate redisign of the Tube Speaker TWO

After collecting some experience with loudspeaker chassis I owned and used for two decades I longed for upgrading the chassis. I always dreamed about a single speaker approach – the ideal point source.

A tube-shaped speaker chassis is predestined for such an approach but is always limited in terms of frequency range – the british company KEF has invested decades of research to overcome this limitation: The solution is a two way system with a centered dome speaker for the high frequencies …

This is a common design for some car speakers but KEF tried to integrate the dome speaker not only mechanically but also acoustically. With success.

The  KEF SP1588 chassis has the integrated dome speaker where it matters: In the same acoustical plane like the low-mid-range speaker membrane.

But I don’t want to stop her with the laudatio about the KEF chassis: The tangerine wave guide is a small addition which – as I understand – helps to adapt the near membrane pressure levels to the wider field in front of the loud speaker, maybe like an exponential horn. But a horn would destroy the acoustics of the mid ranges so the small tangerine wave guide was the only solution. Stop here? – No!

The dome tweeter has it’s own housing which is located inside the coil of the low-mid driver. While KEF has developed this concentric speaker designs over decades the newer development of small magnets with high magnetic flux density has supported “miniaturization without compromises” and the people at KEF were able to create a moderately priced chassis with extraordinary sound.

Apropos sound: These speakers do not produce sound which seems to be glued to the speakers – they reproduce music with all the finesse which is contained by the recordings. Friends of mine who listened to these speakers sunk into the music. I had to ask them three or four times about what happened: “It’s like beeing there, sitting in a bar/concert!”

As physicist and “private designer” I enjoy listening to a system which is partly designed by me – the larger part: Kudos to the engineers of KEF for creating these wonderful chassis which satisfy physicists “needs” for the “right” systems AND satisfy my need for listening to music (not loudspeakers).

For those who do not like to build their own speakers: Try the KEF Q300 loudspeakers which use the same chassis – I have never heard these loudspeakers but reviews give them a very high reputation and they use the SP1588 chassis.

The system behind the loudspeakers:

  • Raspberry Pi 3 with RuneAudio
  • Cambridge Audio DAC Magic 100
  • Trend Audio TA10.1 Amp
  • Subwoofer (40Hz and below, 24dB Linkwitz-Riley-Filter active) with TrendsAudio TA10.1 Amp and Visaton GF200 in dipole housing (Thanks, Mr. Linkwitz!).

Most important addition to the components listet above: Ultrastable power supplies with linear regulators and vast amounts of capacity(~ 40000 µF) delivered by fast condensators. Tests with an oscilloscope showed that these are much better than a 17Ah lead acid battery!